sslyze.exe –certinfo=basic HOSTNAME eg sslyze.exe –certinfo=basic activation.sls.microsoft.com eg sslyze.exe –certinfo=basic –starttls=auto crimson.spectrumcs.net:587 eg sslyze.exe –certinfo=basic –starttls=auto crimson.spectrumcs.net:25 c:\SUPPORT\SSL Software\sslyze>sslyze.exe –certinfo=basic activation.sls.microsoft.com c:\SUPPORT\SSL Software\sslyze>sslyze.exe –certinfo=basic activation.sls.microsoft.com REGISTERING AVAILABLE PLUGINS —————————– PluginCertInfo PluginCompression PluginChromeSha1Deprecation PluginSessionResumption PluginSessionRenegotiation PluginOpenSSLCipherSuites PluginHSTS PluginHeartbleed CHECKING HOST(S) AVAILABILITY —————————– activation.sls.microsoft.com:443 => 18.104.22.168:443 SCAN RESULTS FOR ACTIVATION.SLS.MICROSOFT.COM:443 – 22.214.171.124:443 ——————————————————————– * Certificate – Content: SHA1 Fingerprint:… Read More »
Advanced Customization Options for Connection Manager Implementing VPN support Including Routing Table Updates To set “I am already connected to the Internet” as default settings, you can try the following steps to create a customized connection. 1 Run CMAK to create a connection 2 Follow the wizard until the last step which including “Advanced customization”… Read More »
These instructions are for 1 Draytek 2910. They’ll more than likely working with a Draytek 2820 using the WAN2 port instead of WAN1. 1) Get connected to the internet Connect your BT Infinity modem into WAN1 (or WAN2 if using a Draytek 2820). In the Draytek web interface navigate to WAN -> General Setup. Enable… Read More »
Here are some tips from my experiences of trying to get a 3rd party hardware firewall working with NO NAT5. You’d have thought you could just plug the BT Infinity Modem directly into the WatchGard Firefox firewall and configure to connect with PPPoE authentication. Wrong! Because of the way NO NOT5 works, you get a… Read More »
SNR is Signal to Noise Ratio (aka Noise Margin or Signal to Noise Margin) Relative strength of the DSL signal to Noise ratio. 6dB is the lowest dB manufactures specify for modem to be able to synch. In some instances interleaving can help raise the noise margin to an acceptable level. The higher the number… Read More »
With access to Skys router The DG834GT management interface offers a debug option that enables the embedded Telnet server. To do this, fire up your web browser and enter the following URL (changing the IP address to your router’s address if necessary): http://192.168.0.1/setup.cgi?todo=debug You’ll be asked for the administration username/password (‘admin’ and ‘password’ on a… Read More »
Change both receive and send limits if using XATRN and you want to receive larger emails.
Properties of VPN -> Networking Tab -> Advanced -> DNS Tab. Populate DNS servers and DNS Suffix for this connection. Tick both boxes.
http://www.samknows.com/ http://www.speedtest.net/ http://www.speedtester.bt.com/ http://www.bbc.co.uk/iplayer/diagnostics http://www.vwlowen.co.uk/internet/files.htm – Monitoring software
Test your ADSL line using the BT test user account Broadband test If you are unable to connect to ADSL using the login details provided by your ISP, then try the alternatives below to test your connection. Here are the login settings to use for your router or modem to connect to the BT test… Read More »
The following was posted to Whirlpool forum. It is not supplied by DrayTek, and is NOT specific to DrayTek routers. It is reproduced here as a general guide only. SNR is Signal to Noise Ratio (aka Noise Margin or Signal to Noise Margin) Relative strength of the DSL signal to Noise ratio. 6dB is the… Read More »